Modbus RS485 output clamp on electromagnetic liquid flow meter
Description Modbus RS485 output clamp on electromagnetic liquid flow meter
Modbus RS485 output clamp on electromagnetic liquid flow meter
is adopt stainless steel watchcase thickening, connecting flange is high pressure flange, can stand the pressure of 42MPa. r consists of two parts, the sensor and converter. Modbus RS485 output clamp on electromagnetic liquid flow meter
is based on the work of Faraday's law of electromagnetic induction, used to measure the conductivity is greater than 5μS / cm conductive liquid volumetric flow rate, is a measure of the volume flow of conductive medium for induction meter. In addition to measure the volume flow of conductive liquid, Modbus RS485 output clamp on electromagnetic liquid flow meter
can also be used to measure the volume of a homogeneous liquid solid twophase flow of a liquid suspension of acid and alkali and other strong corrosive liquids and slurries, pulp and paper pulp .
Detailed Modbus RS485 output clamp on electromagnetic liquid flow meter
Parameters Modbus RS485 output clamp on electromagnetic liquid flow meter
| Item |
Modbus RS485 output clamp on electromagnetic liquid flow meter |
| Item |
water electromagnetic flowmeter |
| Size(mm) |
DN15mm---DN3200mm |
| Medium |
Conductive liquid, slurry |
| Medium Temperature |
Chloroprene Rubber:-10-60ºC: PTFE:-10-120ºC |
| Installation Type |
Flange connection, Insert type, sanitary clamp type, thread connection. |
| Lining |
Chloroprene Rubber,PTFE, Polyurethane ,fluororesin-46 |
| Electrode material |
316L,HC,HB,Titanium,Tantalum,Platiniridium |
| Grade of Accuracy |
0.2%, 0.5% |
| Flow Velocity |
≤15m/s |
| Rated pressure |
1.0MPa, 1.6MPa, 2.5MPa, 4MPa |
| Cable Interface |
M20*1.5 or G1/2 Female Thread etc. |
| Sealed |
IP65, IP68 |
| Output Signal |
4-20mA Current or Pulse |
| Communication |
RS485 Protocol Modbus protocol |
| Power Supply |
220VAC, 24VDC |
| |
The instantaneous flow and cumulative flow |
Application Modbus RS485 output clamp on electromagnetic liquid flow meter
1. Drinking water supply, etc.
2. Chemical acid, lye, conductive solution, cooling fluid, additives etc.
3. Drink water, beer, wine, alcohol, milk, yogurt, fruit juice, syrup, blood etc.
4. Refrigeration / air conditioning and refrigeration thermal measurement, or heat energy.
5. Sewage, industrial sewage discharge, sewage etc
6. The textile industry of water, pigments, chemicals, bleaching chemicals etc.
Features Modbus RS485 output clamp on electromagnetic liquid flow meter
1.Fully digital processing, anti-interference ability, reliable measurement, high accuracy flow measurement range up to 1500: 1
2.Ultra-Low EMI switching power supply for supply voltage variation range, anti-EMI performance.
3.16-bit embedded microprocessors, computing speed, high precision, programmable low-frequency square wave excitation frequency and improve the stability of the flow measurement, low power consumption.
4.Using SMD devices and surface mount (SMT) technology, circuit reliability.
5.No moving parts inside the pipe l, unimpeded flow of parts, measuring almost no additional pressure loss.
6.Range in the field can be modified online according to the actual needs.
7.Measurements and velocity distribution, the physical parameters of the fluid pressure, temperature, density, viscosity and the like.
8.High-resolution backlit LCD display, full Chinese menu, easy to use, simple to operate, easy to understand.
9.Have RS485, RS232, Hart, and Modbus and other digital communication signal output. (Optional)
10.Has a self-test and self-assertion.
11.Total hourly recording function to record the total flow in units of hours for hourly metering system (optional)
12.Have three internal totalizer can show the cumulative amount of forward and reverse cumulative amount of the difference between the volume totalizer, the internal power-down features not always, can record 16 power-down times. (Optional)
13.IR handheld operator, 115KHZ communication speed, long-distance non-contact operation of all functions converter (optional)
Company Details.
FAQ
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and 10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:Can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.
Audited Supplier 
){kind=link}