Marchys-Fp Handpump Pneumatic Vacuum Calibration Pumps 0.1-2MPa-1-2obar)1-Year Warranty for Lab Manual Hydraulic Strength Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Years
• Max Diameter of Workpiece: >3200mm
• Mass Scope of Workpiece: >20000kg
• Type: Pressure Calibrators
• Maxcapacity: >1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: No
• Control: Computer Control
• Weight: 1000-2000Kg, 1.8kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Selling Units: Single Item
• Usage: Lab
• Single Package Size: 36X35X15.Cm
• Material: Ss
• Range: -0.1-2.0MPa-1-20bar
• Place of Origin: Shaanxi,China
• Customized Support: OEM,ODM,Obm,Software Reengineering
• Medium: Air
• Threaded Interface: M20 * 1.5 Quick Connector 3
• Brand Name: Yunyi
• Single Gross Weight: 2.500kg
• Voltage: Other
• Test Method: Manual
• Power: Pnuematic
• Transport Package: Carton
• Specification: 0.1%
• Trademark: yunyi
• Origin: China

Product Description

 

 

Product Description

 

Description Yfp20 -0.1-2MPa (-1-20bar) Pneumatic Vacuum Calibration Pumps Handpump

YFP type vacuum pressure hand pump is a quick hand pressure source, by adjusting the pressure vacuum valve can realize the vacuum pumping and positive pressure, suitable to calibrate kinds of differential pressure, vacuum, vacuum pressure and pressure instrument, and also can be used as vacuum pressure of the above pressure instrument. Characteristic of compact size, light weight, easy to operate,  can be matched to vacuum pressure instrument.

 

Structure and Yfp20 -0.1-2MPa (-1-20bar) Pneumatic Vacuum Calibration Pumps Handpump                         

The vacuum pump (see diagram) consists of a buffer valve, a connector, a gas release valve, a cylinder, a piston rod and a handle, and a connecting hose. The M14*1.5 table connector installed on the top of the vacuum pump is connected to the vacuum gauge. When operating the vacuum pump, the bleed valve shall be tightened clockwise first, then the handle shall be gripped by hand, and the handle shall be repeatedly tightened and relaxed to make the piston rod reciprocate so that the vacuum pump will generate negative pressure.

 

Specification Yfp20 -0.1-2MPa (-1-20bar) Pneumatic Vacuum Calibration Pumps Handpump

1 Range:-0.088~2MPa(-0.88~20bar)

2 Working Environment: Temperature 0~40°C, Relative Humidity 5~95%

3 Weight: about 0.5kg

4 Dimensions: 220*110*60mm
5. Accessory

adapter: 1/4NPT Male  to M14x1.5 (Female) 1 piece

 

Use note Yfp20 -0.1-2MPa (-1-20bar) Pneumatic Vacuum Calibration Pumps Handpump                             

1. After connect the instrument, close the pressure relief valve, then hold the handle to pressure.

2. To push the vacuum pressure valve from directional sign "V" to the other side, can easily achieve vacuum convenient; to push the vacuum pressure valve from directional sign "P" to the other side, can easily achieve positive pressure.

3. In order to abtain accurate pressure valve during positive pressrue process, can be fine-tuning by trimmer.

4. After add the positive pressure, firstly relief the pressure through pressure relief valve, then remove the instrument.
Note: When adjust pressure through trimmer, the trimmer should not exceed the red ring sign on the cylinder.

 

Optional products Yfp20 -0.1-2MPa (-1-20bar) Pneumatic Vacuum Calibration Pumps Handpump                         

 

 

Related products Yfp20 -0.1-2MPa (-1-20bar) Pneumatic Vacuum Calibration Pumps Handpump                         

YFP16pneumatic (-1-16bar)	Y061 pneumatic (-1-0bar)	XYBS Hydraulic60 (0-600bar)
Y060 Hydraulic (0-250bar)	YFP25 pneumatic (-1-25bar)	Y039 pneumatic (0-16bar)

 

Company Information