3 way 2 valve manifold price for pressure transmitter
Description 3 way 2 valve manifold price for pressure transmitter
The advantages of 3 port valve manifold are simple operate,relible and functional .can replace the traditional three valves , and supporting the use of domestic and international differential pressure transmitter, widely used in electric power, chemical, metallurgy, textile automatic control systems and scientific research departments. Floating cone valve closure of small moment, cut a good reliability; of dual seal design, the high and low sides of both occurred within easy infiltration, resulting in additional transmitter zero drift, it will not produce shutoff valve leakage, contamination of the surrounding environment . Safe and strong.
Specification
3 way 2 valve manifold price for pressure transmitter
1. Pressure: up to 6000 psig (414 bar) for standard stainless steel body
2. Temperature:
PTFE Packing: -65 °F to 450 °F ( -54 °C to 232 °C)
PEEK Packing: -65 °F to 600 °F ( -54 °C to 315 °C)
Graphite Packing: -65 °F to 1200 °F ( -54 °C to 649 °C )
3.Packing below stem thread isolates the thread lubricant from the media
4.Back seating design protects the packing in fully open position
5.Non-rotating stem tip
6.100% factory tested
7.Orifice:0.157" (4.0mm),CV:0.35
Operating procedures:3 way 2 valve manifold price for pressure transmitter
Three valve with integrated differential pressure transmitter into operation when the program is running:
First, open the drain valve on the two differential pressure transmitter, and then openthe balancing valve, then slowly open the two shut-off valves, air or dirt impulse tube ruled out, close the two drain valve, and then close the Valves The transmitter can be put into operation.
Zero differential pressure transmitter verification procedures:
First open balancing valve, closed two valves, you can check the transmitter zero.
|
Product Name
|
3 Way Manifold
|
|
Material
|
316 SS, Alloy 400, Alloy C-276
|
|
Size
|
1/8"-2"O.D |
|
Nominal pressure
|
Pressure up to 6000 psig (414 bar)
|
|
Technics
|
Forged bar stock
|
|
MOQ
|
If have stock .unlimited quantity. If no stock , MOQ 50pcs .
|
|
Applicable medium
|
oil,gas,water or other medium
|
Audited Supplier 
){kind=link}