| Customization: | Available |
|---|---|
| Accuracy: | 1.0 1.5 |
| Size: | DN15-125mm |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Intelligent electromagnetic flow meter consists of two parts, the sensor and converter. It is based on the work of Faraday's law of electromagnetic induction, used to measure the conductivity is greater than 5μS / cm conductive liquid volumetric flow rate, is a measure of the volume flow of conductive medium for induction meter. In addition to measure the volume flow of conductive liquid, it can also be used to measure the volume of a homogeneous liquid-solid two-phase flow of a liquid suspension of acid and alkali and other strong corrosive liquids and slurries, pulp and paper pulp. Widely used in flow measurement of petroleum, chemical, metallurgy, textile, paper, environmental protection, food and other industrial and municipal administration, water conservancy construction, river dredging and other fields.
Detailed Images of electromagnetic flowmeter.
Features of electromagnetic flowmeter.
1.Simple structure,No moving parts.
2.High measurement accuracy and high reliability, no need for Site commissioning.
3.It can transmit flow signals over long distances, can be networked with computers, and realize centralized management.
4.The amplifying board adopts unique design, which is universal for gas and liquid.
Technical Specifications of electromagnetic flowmeter.
1.Accuracy:1.0 1.5
2.Nominal pressure:1.6MPa,2.5MPa,4.0MPa,4.0MPa and above.
3.Medium temperature:-40ºC~350ºC
4.Pressure loss:cd≤2.4
5.Power supply:12~24VDC
6.Explosion levels:IaIICT6
7.Output signal:≤1V≥6V 4~20mA
Installation conditions:
The sensor should be installed on the horizontal, vertical, inclined (liquid flow from bottom to top) on the same pipe diameter. The upstream and downstream of the sensor should be configured with a certain length of straight pipe section, and its length should meet the requirements of the front straight pipe section 15 ~ 20D and the rear straight pipe section 5 ~ 10D.
The pipeline near the liquid sensor should be filled with the liquid to be measured. The sensor should be avoided to install on the pipeline with strong mechanical vibration.
The inner diameter of the straight pipe section should be consistent with the sensor diameter as much as possible. If it is not consistent, the pipeline with a slightly larger diameter than the sensor should be used.
When the measured medium contains more impurities, a filter should be installed beyond the length required by the sensor. Upstream straight pipe section.
The sensor should be avoided in places where there is strong electromagnetic field interference, small space and inconvenient maintenance.
Outline example
Related products.
Company Information.
Yunyi considers itself not only a manufacture but more conprehensively a provider of industry specific customer-oriented solutions.Our profound understanding of product application and strong technical backgrounds ensure you the best product solution and achieve a greater success.
Xi'an Yunyi Instrument Technology Co.,Ltd is a professional R&D center and manufacture of measuring instruments.And here's a variety of products for you choice: pressure transmitters,temperature transmitters,flow transmitters,weighing instruments and so on.Our products have been made by advanced technology, with high quality, fast delivery period, which have attracted so many domestic and foreign customers.
More products details information can be contact us as below:
Serena Jiang, Sales
Xi'an Shelok Instruments Technology Co., Ltd
12Floor,Inland port Mansion,No.9 Gangwu road, China 710026
){kind=link}