| Customization: | Available |
|---|---|
| Working Medium: | Oil |
| Delivery Time: | About7 Days |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
New Model Desk-top Hydraulic Piston Pressure Calibrator Dead Weight Tester, Pressure Gauge
Description
New Model Luxury Desk-top Hydraulic Piston Pressure Calibrator Dead Weight Tester, Pressure Gauge is a Standard calibration. Dead weight testers are so called primary standards which means that the pressure measured by a dead weight tester is defined through other quantities; Length, mass and time. Typically dead weight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.
Detailed Images
Specification
|
Parameter |
Unite |
Pressure Range |
||||
|
0.6Mpa |
6Mpa |
25Mpa |
60Mpa |
|||
|
Upper limit |
Mpa |
0.6 |
6 |
25 |
60 |
|
|
Lower limit |
Mpa |
0.04 |
0.1 |
0.5 |
1 |
|
|
Nominal piston area |
cm2 |
1 |
0.5 |
0.2 |
0.1 |
|
|
Base and Piston |
Nominal mass |
Kg |
0.4 |
0.5 |
1 |
1 |
|
Generated pressure |
MPa |
0.04 |
0.1 |
0.5 |
1 |
|
|
Special Weights |
Nominal mass |
Kg |
0.1;0.5 |
0.5;2.5 |
1;5 |
1;5 |
|
Generated pressure |
MPa |
0.01;0.05 |
0.1;0.5 |
0.5;2.5 |
1;5 |
|
|
Qty |
pcs |
6 ;10 |
4;11 |
4;9 |
4;11 |
|
|
Thread Size |
|
M20×1.5 |
M20×1.5 |
M20×1.5 |
M20×1.5 |
|
|
Weight |
Kg |
35 |
60 |
47 |
84 |
|
|
Medium |
|
25# transformer oil or mixer of transformer oil and kerosene oil as 7:1, the kinematic viscosity is between 9 ~ 12 centistoke at 20,acid value is not more than 0.05mg KOH/g |
Sebacate (DIDG or diisooctyl sebacate) the kinematic viscosity is between 20 ~ 25 centistoke at 20,acid value is less than 0.05mg KOH/g |
|||
FAQ
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and 10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.
){kind=link}