T type 3 way Pneumatic parts Mechanical Air hand valve Description T type 3 way Pneumatic parts Mechanical Air hand valve
The advantages of 3 port valve manifold are simple operate,relible and functional .can replace the traditional three valves , and supporting the use of domestic and international differential pressure transmitter, widely used in electric power, chemical, metallurgy, textile automatic control systems and scientific research departments. Floating cone valve closure of small moment, cut a good reliability; of dual seal design, the high and low sides of both occurred within easy infiltration, resulting in additional transmitter zero drift, it will not produce shutoff valve leakage, contamination of the surrounding environment . Safe and strong. Process start and stop operation, the output will not unidirectional pressure overload, damage the transmitter. A wide range of applications. Can truly achieve homogeneity wetted materials (including valve) to be made of corrosion-resistant products in different media; installation center distance of a standard size (54mm), can meet 3051,3095,1151,EJA, ABB, FCX-A / C and Honeywell, Siemens, E + H, series supporting the needs of the transmitter. Small size, light weight, easy to install, less maintenance
Specification T type 3 way Pneumatic parts Mechanical Air hand valve1. Pressure: up to 6000 psig (414 bar) for standard stainless steel body
2. Temperature: PTFE Packing: -65 °F to 450 °F ( -54 °C to 232 °C)
PEEK Packing: -65 °F to 600 °F ( -54 °C to 315 °C)
Graphite Packing: -65 °F to 1200 °F ( -54 °C to 649 °C )
3.Packing below stem thread isolates the thread lubricant from the media
4.Back seating design protects the packing in fully open position
5.Non-rotating stem tip
6.100% factory tested
7.Orifice:0.157" (4.0mm),CV:0.35T type 3 way Pneumatic parts Mechanical Air hand valve Product Name | 3 Way Manifold |
Material | 316 SS, Alloy 400, Alloy C-276 |
Size | 1/8"-2"O.D |
Nominal pressure | Pressure up to 6000 psig (414 bar) |
Technics | Forged bar stock |
MOQ | If have stock .unlimited quantity. If no stock , MOQ 50pcs . |
Applicable medium | oil,gas,water or other medium |
Operating procedures: natural gas metering Conventional Manifold Traditional Style stainless steel three-way valve
Three valve with integrated differential pressure transmitter into operation when the program is running:
First, open the drain valve on the two differential pressure transmitter, and then openthe balancing valve, then slowly open the two shut-off valves, air or dirt impulse tube ruled out, close the two drain valve, and then close the Valves The transmitter can be put into operation.
Zero differential pressure transmitter verification procedures:
First open balancing valve, closed two valves, you can check the transmitter zero.
Audited Supplier 
){kind=link}